GET A QUOTE

There are many things to pay attention to when using and maintaining stainless steel elbows. The application measures and precautions of stainless steel elbows are as follows:
1. Stainless steel elbows that have been stored for a long time should be inspected as planned. It is often necessary to keep it clean, clean the exposed appearance, remove dirt, store it neatly in a ventilated place indoors, and prohibit stacking or open storage. Adhere to the drying and ventilation of stainless steel elbows, the cleaning of equipment, and storage in accordance with accurate storage methods.

2. When the equipment is used, the stainless steel elbow can be directly installed on the pipeline according to the connection method, and the equipment can be executed according to the use position. In general, it can be in any position of the pipeline, but it needs to be easy to operate. Note that the flow medium of the cut stainless steel elbow should flow upward under the longitudinal valve, and the stainless steel elbow can only be a horizontal device. The stainless steel elbow in the equipment should be sealed to avoid large area leakage and affect the normal operation of the pipeline.

3. Stainless steel elbow ball valve, globe valve, gate valve when used, can only open and close, do not allow to adjust the flow, so as to avoid corrosion sealing surface, accelerate wear. The gate valve and upper thread globe valve are provided with a back sealing device, and the handwheel is fixed at the top to prevent the leakage of the medium at the liquid filling point.

4. Make stainless steel elbows with handwheels. Do not use levers or other tools to avoid damaging valve components. Turn the handwheel clockwise to close and vice versa.

5. The bolts on the packing cover of the stainless steel elbow valve should be evenly tightened, and should not be pressed into the bending state, so as not to contact or interfere with the movement of the valve stem or cause leakage.

6. Stainless steel elbow should be kept clean during use, the transmission thread must be executed smoothly according to the plan, once the fault is found, the use should be stopped immediately, and the cause of the fault should be identified.